Showing 1–18 of 21 results
-
Blackline G6
Read moreFeaturing direct-to-cloud connectivity, the G6 ensures instant location awareness and critical information delivery via emergency SOS and high-urgency event notifications, while addressing low compliance issues.
Additionally, automated analytics provide accurate insights to pre-empt potential safety risks. The G6, acclaimed for its hassle-free yet data-rich design, seamlessly integrates into any safety program or budget. With its scalability and award-winning status, it serves as a transformative solution to enhance safety and operational efficiency within modern industrial workplaces.
-
Blackline G7c Multi Gas
Read moreGet peace of mind with the wearable G7 multi-gas detector that harnesses connectivity, paired with data insights, for fast incident response to better protect your people from potential hazards and improve safety processes and compliance over the long term.
With man-down functionality including an SOS panic button, fall detection, no-motion detection as well as a wellness check-in- the G7c leverages integrated 4G-cellular connectivity, to link your team to real people confidently accounting for everyone’s well-being and whereabouts in real-time, so no call for help ever goes unanswered.
Detection for up to five gases, with a portfolio of up to 20 gases to choose from. With swappable cartridges so you can change the gas you need to monitor depending on the potential hazards. With out-of-the-box deployment, configurability for a variety of job functions and situations, quick assign to workers, plus monitoring for up to five gases, G7 multi-gas detector can reduce the cost and complexity of fleet management.
-
Blackline G7c Single Gas
Read moreWith built-in connectivity, out-of-the-box deployment, easy integration into existing operations, and a broad gas sensor portfolio to choose from, G7 single-gas monitor is ready to work—whenever and wherever – right away.
With man-down functionality including an SOS panic button, fall detection, no-motion detection as well as a wellness check-in- the G7c leverages integrated 4G-cellular connectivity, to link your team to real people confidently accounting for everyone’s well-being and whereabouts in real-time, so no call for help ever goes unanswered.
Choose from up to 20 gases, with swappable cartridges so you can change the gas you need to monitor depending on the potential hazards. Configurable to address diverse safety needs – from lone workers to a variety of gas detection scenarios.
-
Blackline G8 EXO Area Monitor
Read moreThe revolutionary G8 EXO Area Monitor combines intelligence and versatility in a rugged aluminium casing. With an industry-leading battery life of over 100 days and a large, full-colour display for optimal visibility, the G8 EXO is designed to excel in any environment. Featuring drop-and-go deployment, the G8 EXO area gas monitor effortlessly streams environmental data to the cloud upon activation.
Equipped with built-in 4G cellular connectivity and an optional satellite module, it ensures reliable connectivity wherever it’s needed, without requiring any network configuration. The G8 EXO connects directly to the cloud, eliminating the need for Wi-Fi or radio links and allowing unlimited device connections.
Experience unparalleled ease and efficiency in area gas monitoring with the G8 EXO.
-
Confined Space Kit
Read morePortable Gas Bump and Calibration Kit
Suits Senko MGT
For calibrating or bump testing single gas instruments with H2S, CO, O2 and LEL sensors, supplied in a hard carry case with space for your portable gas detector.
Gas detector calibration in NZ is crucial to keeping your gas detection units operating securely and ensuring accurate readings. Whether you have a portable or fixed gas detection system, we can provide gas detection equipment, calibration and repair services.
-
Maxisafe Dustlight
Read morePersonal Dust Monitor
Dustlight: Your Portable Solution for Dust and Welding Fume Monitoring
The Dustlight is a compact, hand-held dust monitor designed to provide real-time monitoring of airborne particles in any environment where dust exposure is a concern. Built for durability and ease of use, the Dustlight measures respirable dust, including PM1, PM2.5, and PM10 fractions, ensuring that workers know their surroundings and can take immediate action to protect their health.
The intelligent Dustlight algorithm is highly effective for most applications. However, in environments where specific dust or fume particles have been identified, Dustlight offers tailored material configurations of the algorithm. These particle-specific configurations are designed to increase accuracy of known particles providing more reliable monitoring for teams.
-
POLI MP400 Multi-Gas Detector
Read moreThe MP400 is a basic 4-gas model with diffusion sampling, often configured with O2, LEL, carbon monoxide (CO) and Hydrogen Sulfide (H2S) for confined space entry compliance.
The MP400P has pumped sampling and offers a full range of over 30 sensor options, including electrochemical (EC), pellistor, non-dispersive infrared (NDIR) and photo-ionization detector (PID). With 4 sensor slots the use of combination sensors allows up to 6 gases to be measured.
The MP400S and MP400H are used in wireless communication systems for real-time monitoring of gas readings and alarm status, including man-down alarm, from remote locations for better visibility and faster response.
-
Quad Gas + PID
Read morePortable Gas Bump and Calibration Kit
Suits Senko MGT-P
For calibrating or bump testing multi-gas instruments with (OFCH + PID) – O2, H2S, CO, LEL, PID sensors, supplied in a hard carry case with space for your portable gas detector.
Gas detector calibration in NZ is crucial to keeping your gas detection units operating securely and ensuring accurate readings. Whether you have a portable or fixed gas detection system, we can provide gas detection equipment, calibration and repair services.
-
Reactec Dosebadges
Read moreWorkplace Noise Monitoring
We have teamed with experienced noise measurement experts Reactec to integrate their precision sensor technology into our ecosystem with automatic live data capture and cloud-based analytics to takes the guesswork out of workplace noise monitoring.
The Control of Noise at Work Regulations 2005 (the ‘Noise Regulations’) require you to eliminate or reduce risks to health and safety from noise at work.
The Cirrus doseBadge5 is a high performance noise dosimeter that allows you to make compliant occupational noise exposure measurements. With real-time octave band measurements this would be the essential choice when looking to characterise a noise environment in order to choose the most appropriate hearing protection.
This device can be allocated personally to a worker with the Reactec RASOR to allow data gathered by the devices to be personalised and transmitted to the Reactec Analytics for automatic consolidation and reporting. Gain an unprecedented perspective of workplace risk with Reactec’s ability to overlay a range of workplace risk data.
-
Reactec R-Link Proximity
Read moreProximity Warning Technology
Proximity detection technology is the most reliable way to ensure that your workers don’t come into contact with dangerous hazards. Our R-Link smart watch uses the latest ultra-wideband technology to alert an operator when they are within dangerous proximity to moving vehicles or restricted areas.
Proximity detection technology is the most reliable way to ensure that your workers don’t come into contact with dangerous hazards.
R-Link is Reactec’s third-generation workplace wearable. With the most advanced ultra-wideband proximity detection technology, it enables you to easily, effectively monitor and manage your risk environment.
R-Link’s proximity detection technology prevents workers from straying dangerously close to moving vehicles and active equipment. Quickly and easily configure exclusion zones on-site.
Transform data from the field into practical, actionable insight. Readily accessible reports and alerts are available online, via cloud-based analytics and are easily shared with stakeholders.
-
Reactec R-Link Vibration
Read moreVibration Hand-Arm Exposure Monitoring
Features ground-breaking technology to simultaneously assess exposure risk using; pre-defined tool vibration magnitude and hand-arm vibration sensed by the wearer at the wrist. Either of these methods can be used to display HAV risk exposure points and both types of data are stored online for analysis by employers.
The R-Link watch has been developed to assess and manage hand arm vibration (HAV) risks more easily and effectively.
R-Link is Reactec’s third-generation workplace wearable. With the most advanced ultra-wideband proximity detection technology, it enables you to easily, effectively monitor and manage your risk environment.
Tool Tags are small, self-adhesive robust components that are attached to all monitored vibrating equipment. Tool Tags contain tool-specific data which is read by using RFID communication.
-
Senko DuoTracer
Read moreThe Senko DuoTracer is a high-performance dual gas detector with bluetooth connectivity, designed to monitor two gases simultaneously for maximum protection in hazardous environments.
Whether you need to detect oxygen (O₂), carbon monoxide (CO), hydrogen sulfide (H₂S), or carbon dioxide (CO₂), the DuoTracer delivers accurate, real-time measurements.
The DuoTracer supports wireless setting modifications and data download via Bluetooth and Senko IR-LINK.
Sensor(s): O2,CH4,CO2,H2S,SO2,CO,NH3,H2,NO2,O3
-
Senko iGas Detector
Read moreThe iGas is a low cost high quality infra-red based carbon dioxide detector. Its highly efficient li-Ion rechargeable battery provides a run time of up to 14 days from a single charge, and the simple USB based charging system means recharging on the go is easy.
Sensor(s): CO2
iGas is a low cost high quality infra-red based carbon dioxide detector. Its highly efficient li-Ion rechargeable battery provides a run time of up to 14 days from a single charge, and the simple USB based charging system means recharging on the go is easy.
iGas contains an onboard datalogger and is fully configurable using its own dedicated software through the USB charging link. Lightweight, durable and affordable, iGas is the ideal way top protect people from the dangers of CO2.
-
Senko MGT
Read moreThe MGT personal multi gas monitor is a 4 gas detector for the detection of Carbon Monoxide (CO), Hydrogen Sulphide (H2S), Flammable Gases (CxHx) and Oxygen depletion/enrichment.
The MGT is a small format personal multi gas monitor with an easy to understand LCD display. In addition, the monitor also has clear audible, visual and vibration alarms for alerting the user to hazardous environments. Further to this the MGT has been designed to withstand the harshest environments with its patented design, thus reducing long term upkeep costs.
-
Senko MGT-P 4-GAS
Read moreThe SP-MGTP (MGT Pump) is a sampling type gas detector that measures six major gases simultaneously, which cause most of the industrial accidents, to protect workers from the disasters caused by the Oxygen deficiency, Toxic gas poisoning and gas explosion.
It detect up to 6 gases with 37 different toxic and flammable gas combinations and displays their concentrations and raises an alarm(visual, vibrating, and audible) when the risk occurs.
The MGT P is durable, lightweight and simple to use making it a simple and affordable way to detect gases in many industrial environments, including confined spaces.
Sensor(s): O2, H2S , CO and LEL ( cat.)
-
Senko SGT
Read moreThe SGT is a single disposable detector. (SGT-P is replaceable) It operates continuously for two years even without replacement of the battery or gas sensor in order to protect workers from oxygen deficiency or toxic gases.
The SGT is a single disposable detector. (SGT-P is replaceable) It operates continuously for two years even without replacement of the battery or gas sensor in order to protect workers from oxygen deficiency or toxic gases. It measures a gas continuously and displays its concentration and raises an alarm when a risk occurs.
Sensor(s): O2, H2S or CO
-
Senko SGT-P
Read moreThe Senko SGT-P is a single gas serviceable detector designed to detect presence of NH3 toxic gas in the ambient environment.
When activated, the Senko SGT-P continuously monitors ambient air for the presence of a specific gas and alerts the user to potentially unsafe exposure with LED, vibrating, and audible alarms in the event that gas concentration exceeds alarm set points.
Sensor(s): NH3 ( AMMONIA)
-
Single Bump and Calibration Kit
Read morePortable Gas Bump and Calibration Kit
Suits Senko SGT-P
For calibrating or bump testing single gas instruments with O2, NH3, H2S, CO, CO2 sensors, supplied in a hard carry case with space for your portable gas detector.
Gas detector calibration in NZ is crucial to keeping your gas detection units operating securely and ensuring accurate readings. Whether you have a portable or fixed gas detection system, we can provide gas detection equipment, calibration and repair services.
